CTO Server
|
8 SFF CTO Chassis
|
24 SFF CTO Chassis
|
8 LFF CTO Chassis
|
12 LFF CTO Chassis
|
Included Drive Cage
|
8 SFF SAS/SATA
|
3x 8 SFF SAS/SATA
|
8 LFF + UMB
|
12 LFF Chassis
|
Universal Media Bay
|
1 Optional
|
Not available
|
1 Included
|
Not available
|
ODD
|
1 Optional with UMB
|
Not available
|
1 Optional
|
Not available
|
8 SFF Drive Cage
|
Up to 2 Optional
|
Not available
|
Not available
|
Not available
|
8 NVME/SAS Bay
|
Up to 3 Optional
|
Not available
|
Not available
|
Not available
|
8 NVME Cage
|
Up to 3 Optional
|
Not available
|
Not available
|
Not available
|
2 SFF SAS/SATA (Front)
|
1 Optional with UMB
|
Not available
|
1 Optional
|
Not available
|
2 SFF SAS/SATA (Rear)
|
1 Optional
|
1 Optional
|
1 Optional
|
1 Optional
|
2 NVMe (Front)
|
1 Optional with UMB
|
Not available
|
1 Optional
|
Not available
|
4 LFF Mid-plane
|
Not available
|
Not available
|
1 Optional
|
1 Optional
|
Notes: This applies to CTO configurations; field upgrades may differ depending on field configuration.
|
|
Step 2: Choose Required Options
Please select up to two processors required below.
Notes:
- 8SFF CTO 1P models ship with 4 standard fans. The second processor option kit contains 2 additional fans. 12 LFF and 24 SFF CTO Servers ship with 6 High performance fans included; 8LFF CTO Servers ship with 6 Standard fans included. Maximum Performance fan kit is available to meet ambient temperature environments and are required for rear drives or NVMe configurations.
- Maximum memory capacity per processor is dependent on processor models. All processors support up to 6 TBmax memory per processor.
- Mixing of 2 different processor models are NOT allowed.
- Processors with TDP equal to or greater than 150W require High Performance Heatsink (P27095-B21).
- DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
- DIMMs need to be selected in even quantities. Using odd quantity of DIMMs in configurations will cause memory to be unbalanced and may negatively impact system performance.
|
Step 2a: Choose Processors
Processor Option Kits (Required Processor)
3rd Generation Intel Xeon-Platinum
Notes:
- Field upgrades from 1st generation processors (x1xx) or 2nd generation processors (x2xx) to 3rd generation processors (x3xx) not supported.
- All SKUs below ship with processor only. Adequate fans and heatsinks must be selected.
- Processors with TDP equal to or greater than 150W require High Performance Heatsink (P27095-B21)
|
|
Intel Xeon-Platinum 8352Y 2.2GHz 32-core 205W Processor for HPE
|
P36929-B21
|
Intel Xeon-Platinum 8358 2.6GHz 32-core 250W Processor for HPE
|
P36938-B21
|
Intel Xeon-Platinum 8360Y 2.4GHz 36-core 250W Processor for HPE
|
P36939-B21
|
Intel Xeon-Platinum 8368 2.4GHz 38-core 270W Processor for HPE
|
P36940-B21
|
Intel Xeon-Platinum 8380 2.3GHz 40-core 270W Processor for HPE
|
P36941-B21
|
Intel Xeon-Platinum 8358P 2.6GHz 32-core 240W Processor for HPE
|
P37598-B21
|
Intel Xeon-Platinum 8352V 2.1GHz 36-core 195W Processor for HPE
|
P37599-B21
|
Intel Xeon-Platinum 8351N 2.4GHz 36-core 225W Processor for HPE
|
P37602-B21
|
Notes: 8351N is single socket capable even though not being a "U" processor. No dual socket support.
|
|
Intel Xeon-Platinum 8352S 2.2GHz 32-core 205W Processor for HPE
|
P37613-B21
|
Intel Xeon-Platinum 8362 2.8GHz 32-core 265W Processor for HPE
|
P45418-B21
|
Notes: Requires High Performance Heatsink (P26479-B21), Fans (P26477-B21) and DIMM blanks kit (P07818-B21).
|
|
Intel Xeon-Platinum 8352M 2.3GHz 32-core 185W Processor for HPE
|
P45414-B21
|
3rd Generation Intel Xeon-Gold
|
|
Notes: Field upgrades from 1st generation processors (x1xx) or 2nd generation processors (x2xx) to 3rd generation processors (x3xx) not supported.
|
|
Intel Xeon-Gold 6330 2.0GHz 28-core 205W Processor for HPE
|
P36927-B21
|
Intel Xeon-Gold 6338 2.0GHz 32-core 205W Processor for HPE
|
P36928-B21
|
Intel Xeon-Gold 6346 3.1GHz 16-core 205W Processor for HPE
|
P36934-B21
|
Intel Xeon-Gold 6354 3.0GHz 18-core 205W Processor for HPE
|
P36935-B21
|
Intel Xeon-Gold 6348 2.6GHz 28-core 235W Processor for HPE
|
P36937-B21
|
Intel Xeon-Gold 6338N 2.2GHz 32-core 185W Processor for HPE
|
P37603-B21
|
Intel Xeon-Gold 6330N 2.2GHz 28-core 165W Processor for HPE
|
P37604-B21
|
Intel Xeon-Gold 6342 2.8GHz 24-core 230W Processor for HPE
|
P36936-B21
|
Intel Xeon-Gold 6336Y 2.4GHz 24-core 185W Processor for HPE
|
P36926-B21
|
Intel Xeon-Gold 6334 3.6GHz 8-core 165W Processor for HPE
|
P36933-B21
|
Intel Xeon-Gold 6326 2.9GHz 16-core 185W Processor for HPE
|
P36932-B21
|
Intel Xeon-Gold 6314U 2.3GHz 32-core 205W Processor for HPE
|
P37610-B21
|
Notes: Single socket capable, no dual socket support.
|
|
Intel Xeon-Gold 6312U 2.4GHz 24-core 185W Processor for HPE
|
P37611-B21
|
Notes: Single socket capable, no dual socket support.
|
|
Intel Xeon-Gold 5320 2.2GHz 26-core 185W Processor for HPE
|
P36925-B21
|
Intel Xeon-Gold 5318Y 2.1GHz 24-core 165W Processor for HPE
|
P36924-B21
|
Intel Xeon-Gold 5318S 2.1GHz 24-core 165W Processor for HPE
|
P37612-B21
|
Intel Xeon-Gold 5318N 2.1GHz 24-core 150W Processor for HPE
|
P37605-B21
|
Intel Xeon-Gold 5317 3.0GHz 12-core 150W Processor for HPE
|
P36931-B21
|
Intel Xeon-Gold 5315Y 3.2GHz 8-core 140W Processor for HPE
|
P36930-B21
|
3rd Generation Intel Xeon-Silver
|
SKU
|
Notes:
- All SKUs below ship with processor only. Adequate fans and heatsinks (standard, or high performance) must be selected.
- Processors with TDP equal to or greater than 150W require High Performance Heatsink (P27095-B21)
- 2667 MT/S maximum memory speed.
- 8GB SGX Enclave unless otherwise noted.
|
|
Intel Xeon-Silver 4316 2.3GHz 20-core 150W Processor for HPE
|
P36923-B21
|
Intel Xeon-Silver 4314 2.4GHz 16-core 135W Processor for HPE
|
P36922-B21
|
Intel Xeon-Silver 4310 2.1GHz 12-core 120W Processor for HPE
|
P36921-B21
|
Intel Xeon-Silver 4309Y 2.8GHz 8-core 105W Processor for HPE
|
P36920-B21
|
|
|
Step 2b: Choose Memory Options
Please select one or more memory from below.
For new Gen10 Plus memory population rule whitepaper and optimal memory performance guidelines, please go to:
HPE Memory Population Rules
For details on the HPE Server Memory Options Population Rules, please go to:
https://www.hpe.com/docs/intel-population-rules-Gen10plus
For Gen10 Plus memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table
Notes:
- DIMMs need to be selected in even quantities. Using odd quantity of DIMMs in configurations will cause memory to be unbalanced and may negatively impact system performance.
- The maximum memory speed and capacity is a function of the memory type, memory configuration, and processor model.
- DDR4-3200 Memory Kits are only supported with 3rd Generation Intel Xeon Scalable Series Processors.
- Memory compatibility may vary or be limited within a specific server family depending upon the specific configuration being requested. Because each server environment and requirements can vary, memory compatibility is based not only upon the server family, but may also be affected by the amount and type of additional hardware options installed within a specific server configuration. For this reason, some HPE memory DIMMs may be qualified for a server model or family and yet occasionally not be supported with limited configurations within that server family.
- Please consult with the HPE server Quickspecs or your HPE representative if you have any questions regarding memory compatibility with a specific HPE server configuration.
|
Registered DIMMs (RDIMMs)
|
|
HPE 16GB (1x16GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
|
P06029-B21
|
HPE 16GB (1x16GB) Dual Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
|
P06031-B21
|
HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
|
P06033-B21
|
HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
|
P06035-B21
|
HPE 8GB (1x8GB) Single Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
|
P07525-B21
|
HPE 32GB (1x32GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
|
P40007-B21
|
Notes:
- DIMMs need to be selected in even quantities. Using odd quantity of DIMMs in configurations will cause memory to be unbalanced and may negatively impact system performance.
- 3200 MT/s memory SKUs offer a transfer rate of 3200 MT/s at 1 DIMM per channel and at 2 DIMMs per channel
- Mixing of LRDIMM and RDIMM is not supported
- Mixing of 3DS memory and non-3DS memory is not supported
|
|
Load Reduced DIMMs (LRDIMMs)
|
|
HPE 128GB (1x128GB) Quad Rank x4 DDR4-3200 CAS-22-22-22 Load Reduced Smart Memory Kit
|
P06037-B21
|
HPE 256GB (1x256GB) Octal Rank x4 DDR4-3200 CAS-26-22-22 Load Reduced 3DS Smart Memory Kit
|
P06039-B21
|
HPE Persistent Memory (Intel Optane)
|
|
Intel Optane 128GB persistent memory 200 Series for HPE
|
P23532-B21
|
Intel Optane 512GB persistent memory 200 Series for HPE
|
P23538-B21
|
Notes:
- A maximum of 8 Intel Optane Persistent Memory for HPE supported with 1P 3rd Generation Intel XeonProcessors
- A maximum of 16 Intel Optane Persistent Memory for HPE supported with 2P 3rd Generation Intel Xeon Processors
- Intel Optane persistent memory 200 Series for HPE supported with select 3rd Generation Intel Xeon Scalable series processors ONLY (83xx/63xx/53xx) and can only be mixed with either RDIMMs or LRDIMMs.
- Mixing of different capacity Persistent memory is not allowed. Only one Persistent Memory kit capacity is allowed per server/configuration. Cannot be selected with any single rank x8 DDR4 3200AA memory kit. (i.e 1Rx8 PC4-3200AA-R or L).
- This option requires the selection of Maximum Performance Fan Kit (P14608-B21). This note does not apply to 12LFF Model-X or 24SFF Model-X.
- Cannot be selected with HPE 800W FS 48VDC Ht Plg LH Pwr Sply Kit and HPE 1600W FS -48VDC Ht Plg PS Kit.
- Intel Optane Persistent Memory for HPE (PMEM) require either an RDIMM or LRDIMM to be configured. The number of RDIMMs or LRDIMMs required is based on the processor configuration and number of Intel Optane Persistent Memory for HPE (PMEM) selected:
o For 1P Configuration:
· Qty. 1 PMEM requires Qty.= 6 or 8 RDIMMs or LRDIMMs
· Qty. 2 PMEM requires Qty.= 12 RDIMMs or LRDIMMs
· Qty. 4 PMEM requires Qty.= 4 or 8 RDIMMs or LRDIMMs
· Qty. 8 PMEM requires Qty.= 8 RDIMMs or LRDIMMs
o For 2P Configuration:
· Qty. 2 PMEM requires Qty.= 12 or 16 RDIMMs or LRDIMMs
· Qty. 4 PMEM requires Qty.= 24 RDIMMs or LRDIMMs
· Qty. 8 PMEM requires Qty.= 8 or 16 RDIMMs or LRDIMMs
· Qty. 16 PMEM requires Qty.= 16 RDIMMs or LRDIMMs
- Additional Intel Optane Persistent Memory for HPE(PMEM) cannot be selected beyond the provided configurations above.
- Additional HPE Smart Memory kits (RDIMM or LRDIMM) cannot be selected beyond the provided configurations above.
- DDR4 DIMMs must be of same type capacity and rank when combining with Intel Optane persistent memory.
- Additional information for Intel Optane Persistent Memory for HPE (PMEM) can be found at https://www.hpe.com/psnow/doc/a00067733enw?jumpid=in_lit-psnow-red
|
Memory Blank Kit
|
|
HPE DDR4 DIMM Blank Kit
|
P07818-B21
|
Notes: Qty 1 of DIMM Blank kit (P07818-B21) Required only when configuration includes the population of a mid tray kit (P26919-B21 or P27193-B21 or P39769-B21) and memory quantity is less than 32.
|
Step 2c: Choose Power Supplies
Select one or two power supplies from below.
Notes: Mixing of 2 different power supplies is NOT allowed.
|
HPE Flex Slot Power Supplies
|
|
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
|
P38997-B21
|
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
|
865438-B21
|
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit
|
P17023-B21
|
HPE 1600W -48VDC Power Cable Lug Kit
|
P36877-B21
|
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit
|
P03178-B21
|
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit
|
865428-B21
|
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
|
P38995-B21
|
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
|
865434-B21
|
Notes:
- Select a minimum (1), maximum (2) power supplies.
- 1600W Power supplies only support high line voltage (200VAC to 240VAC).
- Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at:
http://www.hpe.com/info/hppoweradvisor.
- All power supplies in a server should match. Mixing Power Supplies is not supported.
- HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power Distribution Units (PDUs). Visit HPE power cords for a full list of optional power cords.
|
|
|
Step 3: Choose Additional Factory Integratable Options
One of the following from each list may be selected if desired at time of factory integration
|
HPE Security Options
|
|
HPE iLO Common Password FIO Setting
|
P08040-B21
|
Notes:
- Replaces iLO default randomized password by an HPE defined common password. HPE highly recommends changing this password immediately after the initial onboarding process.
- Customers who want to choose their own custom iLO default password should use the HPE Factory Express Integration Services
|
|
HPE Trusted Platform Module 2.0 Gen10 Plus Black Rivets Kit
|
P13771-B21
|
Notes:
- This option to be defaulted for all CTO Servers. However option can be deselected.
- The TPM 2.0 Gen10 Option is compatible with the following Operating Systems:
- In TPM 1.2 Mode
- Windows Server 2012 R2
- Redhat RHEL 6.9, RHEL 7.0, and later.
- SUSE SLES 12 SP2, SLES 15 GA and newer
- VMware vSphere 6.0U3, 6.5U1, 6.5U2, 6.5U3, 6.7, 6.7U1, 6.7U2 and 6.7U3
- In TPM 2.0 Mode
- Windows Server 2016 and Windows Server 2019
- Redhat RHEL 7.2, RHEL 8.0, and later.
- SUSE SLES 12 SP2, SLES 15 GA and newer
- VMware vSphere 6.7, 6.7U1, 6.7U2, 6.7U3, 7.0U1 and newer
|
|
HPE Server Security Optimized Service for HPE ProLiant (R9S59A) is an optional security upgrade intended for agencies and regulated industries with enhanced security and compliance needs. Applying this option to a DL3XX Gen10/Gen10 Plus CTO server ensures it is hardened by turning on advanced safeguards in place against cyber-exploits throughout the server lifecycle. An iLO Advanced License required for High Security Mode and compatible intrusion detection device option kits are prerequisites for the full optimization service.
|
|
Factory Instructions and Server Settings
|
|
HPE SR100i Gen10 Plus FIO Software RAID
|
P28417-B21
|
Notes:
- The Legacy Mode Setting and HPE SR100i Gen10 Plus FIO SW CAN NOT be selected together.
- NVMe Trigger and SR100i (P28417-B21) cannot be selected together.
- SR100i (P28417-B21) and VROC SKUs (R7J57A/ R7J58A) CAN NOT be selected together.
- SR100i can support max 2 NVMe drives. To enable 2NVMe support with SR100i below conditions must be met:
o Tertiary 2port Slimline Riser (P27093-B21) OR AROC to NVMe adapter (P14602-B21) must be selected
o Or 2SFF x4Tri-Mode U.3 Kit (P26922-B21) OR 2SFF x4Tmode SbS U.3 Kit (P26924-B21) must be selected
- If NVMe support is enabled on SR100i then below NVMe drives cannot be selected. However if there are any U.3 cage or U.2 NVMe Drive cage which are enabled to have NVMe drives then below drives can be selected however quantities to be restricted only to these drive cages
- CM6 in drive description
- CD6 in drive description
- P4xxx in drive description
|
|
HPE 200GB Logical Size FIO Setting
|
436007-B21
|
Notes:This option is not required and is only selectable if a RAID level has been selected.
|
|
HPE RAID 0 Drive 1 FIO Setting
|
339777-B21
|
Notes:
- If Embedded SATA controller (with SR100i Setting (P28417-B21)) is the primary controller, then RAID 0, 1, 5 are allowed.
- If E208i-a/E208i-p is the primary controller, then RAID 0, 1, 5 levels are allowed.
- If MR216i-a/MR216i-p is the primary controller, then RAID 0, 1 levels are allowed.
- If RAID is selected on NVMe drives without Tri Mode controllers then SR100i mode must selected, and RAID 0, 1 levels are allowed.
|
|
HPE RAID 1 Drive 1 FIO Setting
|
339778-B21
|
Notes:
- If Embedded SATA controller (with SR100i Setting (P28417-B21)) is the primary controller, then RAID 0, 1, 5 are allowed.
- If E208i-a/E208i-p is the primary controller, then RAID 0, 1, 5 levels are allowed.
- If MR216i-a/MR216i-p is the primary controller, then RAID 0, 1 levels are allowed.
- If RAID is selected on NVMe drives without Tri Mode controllers then SR100i mode must selected, and RAID 0, 1 levels are allowed.
|
|
HPE RAID 5 Drive 1 FIO Setting
|
339779-B21
|
Notes:
- If Embedded SATA controller (with SR100i Setting (P28417-B21)) is the primary controller, then RAID 0, 1, 5 are allowed.
- If E208i-a/E208i-p is the primary controller, then RAID 0, 1, 5 levels are allowed.
|
|
HPE Raid 5 w/SP Drive 1 FIO Setting
|
339780-B21
|
HPE RAID FIO Advanced Data Guarding Option
|
339781-B21
|
HPE Customer Defined RAID Setting Service
|
389692-B21
|
Notes:
- A Customer Intent Document must be supplied if this part number is ordered.
This Customer Intent Document should include all details about the desired RAID custom configuration. (This includes drive part #s and quantities, RAID levels desired, which drives should be applied to each RAID level, and if a preinstalled OS has been ordered - which RAID set it should be installed on).
- Recommend to select this RAID FIO P/N over other RAID settings if customer has mixed controller configuration (e.g., E208, P408, or P816 + Tri Mode OR Tri Mode + VROC/SR100 OR E208, P408, or P816 + VROC/SR100i).
|
|
HPE ProLiant DL380 Gen10 Plus 8NVMe Balanced FIO Bundle Kit
|
P37046-B21
|
Notes:
- If this option is selected then following items must be selected in the config:
o Qty 1 of HPE DL38X Gen10 Plus 8NVMe CPU1/2 Cbl Kit (P22829-B21)
o Qty 1 of HPE DL38X Gen10 Plus Maximum Performance Fan Kit (P14608-B21)
o Qty 1 of HPE DL380 Gen10 Plus 8SFF U.3Prem Kit (P26931-B21) or Qty 1 of HPE DL300 Gen10 Plus 2U 8SFF x4 NVMe U.2 Kit (P26932-B21)
- Requires selection of Second Processor
|
|
HPE ProLiant DL380 Gen10 Plus 24NVMe Balanced FIO Bundle Kit
|
P19359-B21
|
Notes:
- If this option is selected then following items must be selected in the config:
o Qty 1 of HPE DL38X Gen10 Plus 8NVMe CPU1/2 Cbl Kit (P22829-B21)
o Qty 1 of HPE DL380 Gen10 Plus x16 2pt 4SFF NVMe Pri Rsr (P27090-B21)
o Qty 1 of HPE DL380 Gen10 Plus x16 2pt 4SFF NVMe Sec Rsr (P27089-B21)
o Qty 1 of HPE DL380 Gen10 Plus 2-port 4SFF Ter Rsr (P27093-B21)
o Qty 1 of HPE DL38X Gen10 Plus AROC NVMe Adpt Kit (P14602-B21)
o Qty 1 of HPE DL380 Gen10 OCP NVMe Adptr Kit (P27094-B21)
o Qty 1 of HPE DL38X Gen10 Plus Maximum Performance Fan Kit (P14608-B21)
o Qty 3 of HPE DL380 Gen10 Plus 8SFF U.3Prem Kit (P26931-B21) or Qty 3 of HPE DL300 Gen10 Plus 2U 8SFF x4 NVMe U.2 Kit (P26932-B21)
- Requires selection of second Processor
- DL38x Gen10 Plus Box3 Removal Special Instr (873763-B21) must be selected along with this option.
|
|